Submerged ARC welding wire: AWS: EM12K; EH14;
Submerged ARC welding wire: AWS: EA1; EA2;
SUBMERGED ARC WELDING FLUX : AWS A5.17 or AWS A5.23.
Agglomerated flux SJ101; AWS F7A4-EH14; F7A4-EM12K;
Agglomerated flux SJ301; AWS F7A0-EM12K; F6A2-EL8;
Agglomerated flux SJ501; AWS F7AZ-EL8; F7A0-EM12K/EH14;
Agglomerated flux HF101G for welding the steel pipeline / Flange;
Agglomerated flux SJ301 for making the spiral welding steel pipe;
Usually, the Agglomerated flux and welding wire EM12K will be used to welding the medium carbon steel ( low carbon steel and low alloy steel ). The certain silicon and manganese elements shall be transmitted into the weld bead from welding flux. Finally, the weld bead can obtain good comprehensive mechanical property.
The neutral or basic agglomerated flux is suitable for welding the low alloy steel. If you required the weld bead has the very high tensile strength and good impact value at low temperature. The higher basic agglomerated flux shall be selected preferably over the others. Duo to get the satisfactory effect for welding the alloy steel parts, the welding flux with No-Manganese or the Medium Manganese shall be combined with the high manganese welding wire H10Mn2 (EH14) or High alloy steel welding wire will produce a very.
Due to choose the welding flux properly, we need to know your detail requirement and your old processing of Sub-Arc-Welding when you purchase and choose the Agglomerated flux for making the important weld-bead and weld-ment.
Agglomerated fluxes is easy customized and designed for the detail application, and can provide various alloying elements needed for welding. We use a binding agent to hold the mineral powder together, are baked, and broken up.
with the same welding-wire to make the welding parts under the similar welding workmanship. Especially for the impact value of weldment, it is quite obvious in the analysis certificate of weldments or welded parts. So, we need to know the application of SAW flux and SAW wire, It is very important for user how to select the SAW flux and the SAW wire properly.
SAW welding wire designation, H08A (EL8) and H08MnA (EM12K) are often to be applied to welding the medium carbon steel ( Low carbon steel ) and relating to be compatible with high Manganese and high Silicon type SAW Flux applied too. For this reason that certain silicon and manganese elements shall be transmitted to weldment and welded parts through SAW flux. So the welded metal can obtain good comprehensive mechanical property through the SAW welding processing.
Also the No-Manganese SAW Flux or the Low Manganese SAW flux or the Medium Manganese SAW flux combine with welding-wire H10Mn2 (EH14) or High alloy steel welding wire will produce a very satisfactory effect for the welding the alloy steel parts.
